Boss TurboStart BR-800, Owner'S Manual

Page: 86 / 168

86
Adjusting the Tone of Each Track
The BR-800 provides a three-band equalizer that’s
independent for each track. You can use this to adjust the
tone quality of each track.
1
Press the [TRACK] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “EQ,” and press the [ENTER] button.
The EQ edit screen will appear.
D_EQ.eps
3
Use the CURSOR [ ] [ ] buttons and the dial to
turn each track’s EQ on or off.
* You can move the cursor to each track by pressing that
track’s Track [REC] button.
4
Press the [ENTER] button.
The EQ parameter edit screen will appear.
D_EQ_Edit.eps
5
Use the CURSOR [ ] [ ] buttons to select a
parameter, and use the dial to edit the value.
For more about the track EQ parameters, refer to
“Parameter List” (p. 86).
6
When you’ve finished editing, press the [EXIT]
button a number of times to return to the play screen.
Editing the Track EQ
The track EQ does not have “patches.” Track EQ
settings are saved as part of the song data.
Parameter List
Parameter/
Range
Explanation
ON/OFF
OFF, ON Turns the EQUALIZER effect on/off.
LOW GAIN
-12–+12dB Adjusts the low frequency range tone.
LOW FREQ (Low Frequency)
40Hz–1.6kHz
Specifies the center of the frequency range
that will be adjusted by the LOW GAIN.
MID GAIN (Middle Gain)
-12–+12dB Adjusts the middle frequency range tone.
MID FREQ (Middle Frequency)
20Hz–10kHz
Specifies the center of the frequency range
that will be adjusted by the MID GAIN.
MID Q (Middle Q)
0.5–16
Adjusts the width of the area affected by
the EQ centered at the MID FREQ.
Higher values will narrow the area.
HIGH GAIN
-12–+12dB Adjusts the high frequency range tone.
HIGH FREQ (High Frequency)
400Hz–16kHz
Specifies the center of the frequency range
that will be adjusted by the HIGH GAIN.
If you adjust the equalizer while listening to the
sound, you may notice a clicking noise. This is not a
malfunction. If the noise is objectionable, make
adjustments while the sound is not playing.
BR800_e.book 86 ページ ２０１１年６月６日 月曜日 午後２時１４分