background image

 

9

 

Connections

 

* When running the unit on battery power, inserting a plug into the GUITAR IN or BASS IN 

Jack will automatically switch the unit on.

* The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. 

Should you prefer to use batteries, please use the alkaline type.

* To prevent malfunction and/or damage to speakers or other devices, always turn down the 

volume, and turn off the power on all devices before making any connections.

* If there are batteries in the unit while an AC adaptor is being used, normal operation will 

continue should the line voltage be interrupted (power blackout or power cord disconnection).

* Once the connections have been completed (p. 8), turn on power to your various devices in 

the order specified. By turning on devices in the wrong order, you risk causing malfunction 
and/or damage to speakers and other devices.

 

When powering up:

Turn on the power to your guitar amp last.

When powering down:

Turn off the power to your guitar amp first.

 

* Always make sure to have the volume level turned down before switching on power. Even 

with the volume all the way down, you may still hear some sound when the power is switched 
on, but this is normal, and does not indicate a malfunction.

* When operating on battery power only, the unit’s indicator will become dim when battery 

power gets too low. Replace the battery as soon as possible.

OC-3_e1.book 9 ページ 2003年7月11日 金曜日 午後6時47分

Summary of Contents for OC-3 Super Octave





















Reviews: