background image

 

13

 

Panel Descriptions

 

fig.panel-L.eps

 

1.

 

[POWER]

 

This is the power button. It turns the power 
on/off.

 

2.

 

[EXIT]

 

Returns you to the previous screen, or 
cancels an operation.

 

3.

 

[UTILITY]

 

Accesses a variety of functions, such as 
memory card operations and track editing.

 

MODE

 

• Hold down [EXIT] and press [UTILITY]

Selects the recording mode.

 

4.

 

CURSOR[

][

]

 

Use these buttons to move the cursor or 
move between pages.

 

5.

 

[EFFECTS]

 

Turns the effect on/off, and accesses a 
screen where you can edit the settings.

 

6.

 

[RHYTHM]

 

Accesses the screen for rhythm various 
settings.

 

TUNER

 

• Hold down [EFFECT] and press [RHYTHM]

Turns the built-in tuner on/off.

 

7.

 

[MP3/TRAINER]

 

Switches you to a mode in which you can 
play or record MP3/WAV data.
In this mode you can also use the Phrase 
Trainer function.

 

8.

 

[TR1]–[TR4]

 

Select the track you want to record, or access 
a screen where you can control the track 
volume. In some screens, these serve as 
function buttons, which offer quick access to 
a variety of functions.
For example, wherever [TR1] (SNG) appears 
in this manual, it means that pressing [TR1] 
will select “SNG,” which is shown in the 
screen.

 

9.

 

 (Rewind)

 

Rewinds the song while you hold down this 
button.

 

Top Panel

8

1

2

3

4

5 6 7 9

10 11 12

14

13

15

17

18

16

MICRO-BR_e.book 13 ページ 2007年12月6日 木曜日 午後4時8分

Summary of Contents for MICRO BR













































































































































Reviews: