2
IRONING TEMPERATURE GUIDE
1.
If ironing instruc ons are missing but you know the kind of fabric, select
••
Moderate Temperature : for semi synthe c materials - Silk / Wool
Check for label with ironing instruc ons. Follow below instruc ons in all cases
•
Low Temperature : for synthe c materials - Nylon / Rayon
••• Hot Temperature : for Linen / Co on
2.
These instruc ons are valid for the fiber materials only; If some kind of finish has been applied
(gloss, wrinkle, relief etc.) the tex le can best be ironed at a lower temperature.
3.
The iron heats up quicker than it cools down. Start ironing the ar cles requiring lowest
temperature and then progress to the higher temperature.
4.
Not sure about the fabric, find a spot, which will be invisible when wearing or using the ar cle
to try out the ironing temperature. Always start with low temperature and increase to one
which gives the required results)
5.
Velvet and other textures, which rapidly acquire shiny spots, should be ironed in one direc on
only. Always apply light pressure and keep moving.
6.
Iron the reverse side of synthe c materials and silk to prevent shining spots. To prevent staining
do not use the spray on silk or other delicate fabrics.
HOW TO USE
2.
Insert the main plug into the wall socket. The Power Indicator will now turn on.
1.
Set the appropriate ironing temperature by means of the Variable Temperature Controller.
7.
Set the Variable Temperature Controller to posi on “MIN”
8.
Remove the main plug from the wall socket.
9.
Let the iron cool down for atleast 30 mins.
10. Store the iron standing on its rear side to prevent damage to the Soleplate.
3.
When the Power Indicator is gone and turned on again, you can start ironing.
6.
Place the iron on its rear side once done.
4.
The Power Indicator will turn on from me to me during ironing. This has no effect on ironing.
5.
If you set the temperature control to a lower se ng a er ironing at a high temp, do no
recommence ironing un l the Power Indicator turns on again.
CLEANING & MAINTENANCE
1.
Before cleaning, remove the main plug from the wall socket and allow the iron to cool down
sufficiently.
3.
Never immerse the appliance into water or any other liquids.
2.
The appliance can be cleaned with a damp cloth
