manualshive.com logo in svg

Boss GT-6B, Owner'S Manual, Page: 5 / 84

Share
Download
Boss GT-6B Owner'S Manual Download Page 5

5

Contents

USING THE UNIT SAFELY .............................. 2

IMPORTANT NOTES...................................... 4

Main Features ............................................. 7

Panel Descriptions ....................................... 8

Front Panel ..........................................................................8

Rear Panel .........................................................................11

Chapter 1 
Playing Sounds ......................................... 12

Making Connections ........................................................12

Turning On the Power ......................................................13

Adjusting the Output Level............................................................13

What is a Patch? ...............................................................14

Selecting Patches.............................................................14

How to Switch Patches....................................................................14
Turning Each of the Effects in a Patch On and Off .....................15
About the Information Appearing in the Display.......................15
If the Patch Does Not Switch..........................................................15

Turning Off the Power ......................................................15

Chapter 2 
Creating You Own Favorite Tones (Patches)

.. 16

Getting the Tones You Want-Fast (EZ Tone) .................16

Adjusting the Tones with the Knobs ..............................16

Adding and Omitting Effects ...........................................18

Using the Buttons to Switch Effects On and Off..........................18
Switching Effects with the Pedals..................................................18

Setting the Effect Tones (Quick Settings) ......................19

Making More Detailed Settings with Individual Parameters...19

Using the Pedal Effects 
(Wah, Pedal Bend, Ring Modulator)................................20

Wah ....................................................................................................20
Pedal Bend.........................................................................................20
Ring Modulator ................................................................................21

Naming Tones ...................................................................21

Changing the Order of the Effects (Effect Chain)..........22

Chapter 3 
Saving the Tones You Have Created .......... 23

Write...................................................................................23

Copying Patches ..............................................................23

Exchanging Patches ........................................................24

Chapter 4 
The Effects Explained..................................25

COMP/LIMITER (Compressor/Limiter) ............................25

OD/DIST (Overdrive/Distortion) .......................................26

■

 OD: Overdrive ..............................................................................26

■

 DST: Distortion .............................................................................26

■

 FUZ: Fuzz ......................................................................................26

CHORUS ............................................................................27

REV/DLY (Reverb/Delay)/SOS (Sound On Sound).........27

■

 REV: Reverb ..................................................................................28

■

 DLY: Delay ....................................................................................28

■

 R&D: Reverb & Delay..................................................................29

■

 SOS: Sound On Sound.................................................................29

PREAMP/SPEAKER ..........................................................29

■

 Preamp...........................................................................................29

■

 Speaker ..........................................................................................30

3 BAND PARAMETRIC EQ ...............................................31

WAH ...................................................................................31

■

 WH: Pedal Wah ............................................................................31

■

 TW: Touch Wah............................................................................32

■

 AW: Auto Wah .............................................................................32

FX-1 ....................................................................................33

■

 OCT: Octave..................................................................................33

■

 ENH: Enhancer.............................................................................33

■

 SG: Slow Gear ...............................................................................34

■

 DEF: Defretter ...............................................................................34

■

 R.M: Ring Modulator...................................................................34

FX-2 ....................................................................................35

■

 PH: Phaser .....................................................................................35

■

 FL: Flanger.....................................................................................36

■

 HRM: Harmonist..........................................................................36

■

 P.S: Pitch Shifter ...........................................................................37

■

 PB: Pedal Bend..............................................................................38

■

 2CE: 2x2 Chorus ...........................................................................38

■

 ASL: Auto Slap .............................................................................39

■

 SDD: Short Delay .........................................................................40

■

 VIB: Vibrato...................................................................................41

■

 HMN: Humanizer ........................................................................41

■

 T/P: TREMOLO/PAN ................................................................42

■

 SYN: Bass Synth ...........................................................................42

NS: Noise Suppressor......................................................44

MASTER.............................................................................44

FV: Foot Volume ...............................................................44

Chapter 5 
Setting the Pedal Functions (Pedal Assign) ..45

Selecting Each Effect to Be Turned On and Off 
with the Number Pedals ...................................................45

Settings for Using the Expression Pedal .......................45

Setting the Range of the Volume Change.....................................45
If You Don’t Want to Use the Expression Pedal as a “Volume Pedal”...46

Settings for Using the Expression Pedal Switch/
CTL Pedal ..........................................................................46

Making Settings Instantly (Quick Settings)..................................46
I

f You Don’t Want to Use the Expression Pedal Switch or CTL Pedal...47

Editing “Quick Settings”.................................................................47

Summary of Contents for GT-6B





















































































Reviews:

No comments