Front panel controls and features
EQ1208 User’s Manual - page 3
Specifications
EQ1208 User’s Manual - page 8
CONTENTS
EQ1208 User’s Manual - page 1
U S E R ’ S M A N U A L
EQ1208 User’s Manual - page 5
Installation
Audio connections
Power connections
EQ1208 User’s Manual - page 2
EQ1208 User’s Manual - page 6
PEQ20 User’s Manual - page 4
Top panel controls and features
Figure 1
Mounting the equalizer
Figure 3
Power connections
to REMOTE TURN-ON
terminal of head unit
Please note that this equalizer contains an internal ON/OFF switch, which is activated
when the head unit is turned on. For this reason, in order to use this equalizer, your
head unit must have a remote-turn on lead.
This graphic equalizer consists of
several audio filters, each centered
at a specific frequency in the audio
range.The EQ1208 enables you to
cut or boost the output level by up
to 18dB as desired at the following
frequencies:
40Hz • 150Hz • 1kHz • 20kHz
The EQ1208 also features a subwoof-
er channel with an independent
crossover control. The crossover can
be set from 30Hz to 250Hz. Any sig-
nal below the frequency setting will
be sent to the subwoofer outputs,
allowing you to optimize the sound
to suit your particular subwoofer set-
up. Use of the subwoofer channel is
optional.
Figure 2
Audio input and output wiring
To SUBWOOFER
CHANNEL
Audio Inputs
of amplifier
To OUTPUTS
of RADIO
(head unit)
To FRONT
Audio Inputs
of AMPLIFIER
To REAR
Audio Inputs
of AMPLIFIER
To OUTPUTS
of CD or DVD
PLAYER
2
How an equalizer is used
3
Front panel controls and features
4
Top panel controls and features
5
Installation
5
Mounting the equalizer
6
Audio connections
7
Power connection
8
Specifications
Congratulations on your
purchase of a
Equalizer.
It has been designed, engineered
and manufactured to bring you
the highest level of performance
and quality, and will afford you
years of listening pleasure.
Thank you for making
your choice for car audio
entertainment!
40Hz• 150Hz • 1kHz • 20kHz
+/- 18dB (boost/cut)
20Hz-20kHz
variable 30-250HzHz
105dB
less than 0.05%
less than 0.05%
60dB
10-16V negative ground
7V
6.8” x 4.25” x 1.1”
EQ center frequencies
Equalization range
Frequency response
Subwoofer crossover freq.
Signal-to-Noise Ratio
EQ THD
Subwoofer channel THD
Channel separation
Power supply
Output voltage
Dimensions (W x D x H)
All specifications subject to change without notice.
page
EQ1208
RADIO and CD INPUT GAIN
CONTROLS
These controls permit you to balance
the input gain from your input sources
independently.
1
PHASE SHIFT SELECTOR
Select either 0º or 180º to correct for
time alignment issues in your audio
system.
3
2
English
Español
Português
Français
Deutsch
Chassis
ground
point
REMOTE
+12V
GROUND
CD/DVD
RADIO
EQ1208
1
2
3