Control Panel
BND
BAND
Touch to switch between the 3FM and the 2AM(MW) bands.
The designation of the corresponding level -
FM1, FM2, FM3, AM1(WM1),
AM2(MW2)
- is shown in the TFT.
-17-
SELECT BUTTON
To access the available adjustment settings for audio and video, touch
repeatedly to cycle through and select them:
SEL
Tint Contrast Bright Color Bluetooth
Buzzer Volume Bass Treble Balance Fader
-Retrieve a preset station
Touch repeatedly to retrieve a station which had been stored in the
memory in advance the chose number is shown on display.
MUTE/PTY
In any mode, touch to mute the sound.
In RDS Radio mode, touch repeatedly to step through the different station
categories (such as NEWS, INFO, SPORTS, etc). When you have selected the
category, the radio searches for stations in that category.
MUTE
PTY
Normal Playback 2x 4x 8x 20x
UP/DOWN BUTTONS
In Disc (or USB) Playback mode, briefly touch or to skip forward
or back one track. Touch and hold for more than two seconds to begin Fast
Forward (or for Fast Reverse) mode. Press the button again as needed,
to cycle thru the range of available speeds.
In Radio mode, briefly touch these buttons to manually tune the radio in
single steps. Touch and hold for two seconds for the radio to seek the next
station automatically.
ANGLE (Screen position)
You can change the viewing angle of the operating unit. Touch up to four times
in order to select your desired position.
VOL-/VOL+ BUTTON
In normal mode, this button is used to adjust the volume to desired level.
It is also used as an UP/DOWN button when audio or video settings are being
adjusted when accessed using the SELECT button.
