
WATCHES WITH MULTIPLE FUNCTIONS
Multi-eye – Day – Date – 24-hour counter
7
24-hour hand
Date hand
Direct-drive seconds
Day-of-the-week
hand
Setting the hour, minutes and 24 hours:
1. Pull the crown out to position 3.
2. Rotate the crown clockwise to place the hour, minute and
24-hour hands at the desired time.
3. Push the crown back to position 1.
Setting the second time zone:
1. With the crown in position 1, press and release the push-
button
B
to place the 24-hour hand to the desired position;
the hand moves forward one hour with each press.
Setting the day:
1. Pull the crown out to position 3.
2. Rotate the crown clockwise: The day hand moves forward
one figure each time the hour and minute hands pass the
midnight position (00:00).
3. Once the desired day is obtained, push the crown back to
position 1.
Quick date correction:
1. Pull the crown out to position 2.
2. Rotate the crown clockwise to move the day
forward step by step.
3. Once the desired day is obtained, push the crown
back to position 1.
WARNING: To avoid damage to the watch mechanism, do not
use the quick day correction function between 9:00 pm (21:00)
and 12:30 am (00:30) as the automatic date changes take place
during this interval.
Setting the day of the week:
1. Pull the crown out to position 3.
2. Rotate the crown clockwise: the day-of-the-week hand
moves forward one day each time the hour and minute hands
pass the 4:00 am (04:00) position.
3. Once the desired day is obtained, push the crown back to
position 1.
Setting the month:
1. With the crown in position 1, press then release push-button
A
to set the month; the month hand moves forward one
month at each press.
CAUTION: To avoid damage to the watch mechanism, do not
use the quick month correction function on the 31st of the
month as automatic month changes take place on this day.