9
Panel Description
Using the Looper
REC/PLAY/OVERDUB indicator status
Indicator Explanation
REC
Blinking while in record-standby, lit while recording.
PLAY
Lit while playing back.
OVERDUB
Lit while overdubbing.
Looper operations using a footswitch
You can also operate the looper by using a footswitch (sold
separately: FS-5U, FS-6, FS-7).
5
If a footswitch is connected, recording starts not when audio
is input but when you press the footswitch (TIP). Playback
and overdubbing operations are the same as when using the
[LOOP] button.
5
If you press the footswitch (TIP) twice within one second, the
looper stops.
5
If you hold down the footswitch (TIP) for two seconds or longer,
the phrase is cleared.
Stop/Clear
To stop, press the [STOP]
button.
To clear the phrase, hold
down the [STOP] button for
at least two seconds while
stopped.
Record
When audio is input,
recording starts immediately.
At the point where you want
to loop, press the [LOOPER]
button to playback.
Record-standby
Press the [LOOPER] button
to enter record-standby
mode.
Loop Playback
Play back the loop.
Pressing the [LOOPER]
button will switch to
overdubbing.
Overdub
Record additional layers
while playing back the
loop.
Press the [LOOPER] button
to switch to playback.
