g265127
Figure 6
1.
Slide-stop adjustment
holes
2.
Slide stop
4.
Torque the bolts to 28 N·m (19.7 ft-lb).
Installing the Tie-Down
D-Rings
1.
Using a 7/16-inch drill bit, mark and drill the
holes for the D-rings as shown in
Note:
Drill the holes through or near the frame
cross-members of the vehicle.
g029488
Figure 7
1.
Back of the spreader leg
to the D–ring center—3.8
cm (1–1/2 inches)
2.
D–ring center to the
D–ring center—129.5 cm
(51 inches)
2.
Install the D-rings as shown in
and
torque the bolts to 28 N·m (19.7 ft-lb).
g029489
Figure 8
1.
Bolt (1–1/2 inch)
4.
Bedmount plate
2.
Flat washer (3/8 inch)
5.
Flat washer (3/8 inch)
3.
D-ring
6.
Locknut
10
Summary of Contents for VBX 6500
Page 31: ...Notes ...
Page 32: ......
