6.
Slowly move the machine towards the broom
and raise the coupler upwards until the broom
hooks onto the coupler.
g371990
Figure 6
7.
Rotate the coupler-pin 90° so that it engages
with the broom assembly.
g371991
Figure 7
8.
Lower the attachment coupler until the broom
kickstands rest on the ground.
9.
Shut off the machine.
10.
Route the hoses from the motor to the high flow
connectors on the front of the machine.
Note:
Do not engage the high flow pump
without the broom hydraulic hoses attached.
g372115
Figure 8
11.
Attach the motor hoses to the right side of the
machine with the hook-and-loop fastener.
12.
Connect the hydraulic cylinder hoses to the low
flow connector on the front of the machine.
g372931
Figure 9
6