www.bia.lighting | [email protected]
page 3 / 2
P R O D U C T M A N U A L
COPYRIGHT BIA
©
2020
V
03.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certi
fi
ed in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
WARRANTY STATEMENT
This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will
fi
x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit
www.bia.lighting/warranty
BIA reserves the right to change speci
fi
cations and other information, modify products and discontinue items without prior noti
fi
cation.
PRODUCT VARIANTS
CCT :
3000K
4000K
6000K
RGB
Beam Angle:
10°
20°
40°
60°
PRODUCT SPECIFICATIONS
Power
: 24W
Input Voltage
: 24V DC
Ambient Temperature : -10 to 45°C
Dimming
: PWM
MAGNA
24
INGROUND LIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
ADDITIONAL INFORMATION
1. This product can be installed directly into decking.
2. Canister is required for installation into concrete slab.
3. The face of the light
fi
tting must be installed
fl
ushed against the
surface.
4. Installation on uneven surfaces is not recommended.
5. Ensure the prepared cable is of the correct size and length.
6. Ensure all drivers, cables and joins are suf
fi
cient and installed to
the required IP rating.
7. Adequate drainage must be prepared underneath the light/
canister.
8. If cleaning maintenance is required, ensure power is off, use a
clean micro
fi
bre cloth, slightly dampened with a mild dilution of
detergent that is PH neutral, alcohol free and non-abrasive.
PARTS INCLUDED
SOLD SEPARATELY
Driver
Canister
Inground
Light
225mm
IP
68
IK
10
Stainless
Steel
316