www.bia.lighting | [email protected]
page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA
©
2019
V
10.19
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
WARRANTY STATEMENT
This product is covered by a 2 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit
www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
PRODUCT VARIANTS
CCT :
3000K
4000K
PRODUCT SPECIFICATIONS
Input Voltage
: 100-277 V
Ambient Temperature : -10 to 45°C
Dimming
: No
Weight
: 2.5kg
HALO
LED BOLLARD
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
ADDITIONAL INFORMATION
1. Cage must be installed prior to concrete work.
2. Please plan accordingly and allow for adequate drainage.
3. Luminaire base must be installed flushed against the surface.
4. Installation on uneven surfaces is not recommended.
5. Installation must be carried out with care to ensure the surface
of the luminaire is not scratched or damaged. Damaged
surfaces will result in material corrosion when exposed under
harsh weather conditions.
6. Please ensure luminaire cover is sealed.
7. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
PARTS INCLUDED
Cage
Bollard
IP
55
