TV OPERATION
-27-
TV OPERATION
Switching to TV mode
1. Connect the TV antenna to the TV.IN
(from Ant) jack on the back of the unit.
2. In any mode, press the MODE to enter
the TV mode . (Or press the MOD
button on the remote control.)
The message will display as below:
press the SEARCH button on the remote
control to search all available channels
automatically .
Auto searching TV channels
It will display as follows:
TV
PAL BG
06
VHF L ----------------------------------
AUTO SCAN
Note:
In TV mode, the +10 button is not
available.
- The numeric button (0-9) on the remote
control allow you to select the
corresponding channel directly.
Selecting channel
press the CH+ button on the remote
control to choose the channel upward .
press the CH- button on the remote
control to choose the channel
downward .
Add/Skip Available Channels for
the CH+ and CH- Buttons
In TV mod e , after searching channels auto-
matically, the CH+ an d CH - buttons on the
remote control can select only the channels
with available signal.
1) Add Availabl e Channel s
Use the number buttons to select a channel
without available signal , then press the SKI P
button on the remote control, the screen will
display SAVE, the chan nel will be available
for the CH + and CH- button s.
2) Ski p Ava ilabl e Channel s
Use the CH+ or CH - button on the remote
control to select a channel you want to skip
for the CH+ and CH- buttons, then press the
SKI P bu tton on the remote control, the screen
will display SKI P, the channel will be skipped
for the CH + and CH- buttons.
Fine Tuning
press FINE+/FINE- button on the remote
control to fine tune the current channel .
Summary of Contents for BV7342T
Page 1: ......