Boss Audio Systems MR1360UAB, User Manual

Page: 5 / 10

5
OPERATING INSTRUCTIONS
1. POWER ON/OFF / MUTE
Press and hold this key to switch the unit on and off.
If you just press this key briefly, it will turn to MUTE. To return to sound, press it briefly again.
2. VOLUME UP/DOWN
Turn the VOL knob
VOL VOL
or
VOL VOL
to increase or decrease the volume levels.
3. SELECT / MENU
Press the SEL knob to adjust BASS/TREB/BAL/FAD. To select other functions, continue to press the
SEL knob until the desired function is shown on the display. See Figure 1.
1 2 3 4 5
SEL SEL SEL SEL SEL
Fig. 1 Selection of sound control functions
1. VOL 2. BAS 3. TRB 4. BAL 5. FAD
Press and hold SEL to adjust below function:
2 sec.
SEL EQ SEL AVOL SEL STEREO SEL LOUD SEL LOC SEL
ADJUST
CLOCK
EQ MODE
Turn VOL knob to select one of the settings EQ OFF/CLASS/ROCK/POP/EQ FLAT.
AVOL
Turn the VOL knob to set the volume level, with which the device is to be set when turned on.
STEREO/MONO
When FM signal is weak or distorted, reception may improve by turn VOL knob to select MONO.
LOUDNESS
Turn the VOL knob to the Loudness ON or OFF function.
LOCAL
“Local” position in areas with strong signal will cause radio to stop at only strong stations. During manual
tuning (LOC appears). Select Distant position in areas with weak signal. Turn the “VOL” knob to set the
LOCAL ON/OFF.
ADJUST CLOCK
Turn the VOL knob to anti-clockwise for hours and turn VOL knob to clockwise for minutes.
4. PRESET STATIONS
Six numbered preset button store and recall stations for each band.
Storing a station:
1. Select a band
2. Choose your favorite station
3. Hold a preset button longer than one second. Preset station number appears in the display when
station is saved.
Recall a station:
1. Select band
2. Press a preset button for less than one second to select stored station.
5. MODE BUTTON
By pressing this key, user can select. AUX/TUNER/SD/USB/BT mode.