After the scanning is finished, broadcasting will resume on the M1.(It can store 3x6
stations for FM and 2x6 stations for AM)
2) When pressing the APS button briefly, the radio will scan each preset station for 5
seconds in FM or AM band from M1.
After finishing a circle of scanning, it will resume broadcasting on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time; In AM band,
is
checked one at a time.
5. PRESET STATION [ 1-6 ] BUTTONS
In RADIO mode:
1) To memorize the current frequency on the current band, long press any of the number
buttons (1-6) on remote control or on the front panel .
2) To recall the preset memory on the current band, briefly press one of the preset buttons
[1-6] on remote control or on the front panel.
6. STEREO/MONO BUTTON
Press the ST button on the remote control to select the STEREO or MONO sound
mode for FM band.
7. LOC BUTTON
1) In RADIO mode, when the signal of the distance radio station is very weak and the
receiving effect is bad during tuning. If there is the word LOC on the monitor, press this
button to turn off the LOC function, then tune again for the distance radio station;
2) In RADIO mode, when the signal of the local radio stations are too strong and the inter-
ference doesn t allow the tuner to lock on stations, press this button to turn on the LOC
function to display the word LOC on the monitor, then tune again for the local radio stations.
to select one of the following mode:
PTY MUSIC group- - PTY SPEECH group -- OFF
PTY group is on,
PTY group is on, pressing the 6 number buttons also can select one of PTY
programs as above.
AM1, AM2
8. PTY (PROGRAM TYPE) BUTTON
Press the PTY button shortly
When
press the VOL+ or VOL- button on the remote control or rotate
the VOL knob on the front panel to select one of PTY programs as follows:
<-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE<-->DRAMA<-->CULTURE
<-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE<-->CHILDREN<-->SOCIAL
<-->RELIGION<-->PHONE IN<-->TRAVEL<-->LEISURE<-->DOCUMENT< -->PTY
NONE<-->POP M< -->ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M
<-->JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<-->
When
After selecting one of the PTY programs, it will display SEEK PTY and automatically
search for the station of the PTY program. If the station of the PTY program does not exist,
it will display PTY NONE and then return back to the normal station.
9. AF [ALTERNATIVE FREQUENCIES] BUTTON
When AF button is pressed briefly, the AF switching mode is selected and the status of the
AF switching mode is displayed by AF segment on the display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
3. During JPEG playback, press one of the >/</^/v buttons to change the angle of
viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During JPEG playback, press the PROG button to change the mode of refresh picture.
During JPEG playback, press the STOP button to stop playing and return to the root
menu.
*
During JPEG playback, the following buttons are not available: SLOW-FWD,
SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
*
In JPEG mode,the other operations are same as ones in MP3/WMA mode.
1. The root menu is displayed on the monitor when begins to switch on
mode, then
it will automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER ,file or icon, then press the OK or PLAY button to open or play the selected
file.
When displaying the root menu, you can also use the number buttons to select the
serial number of the file to play the file.
*
The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.
*
The other functions are same as ones in DVD mode; but the RPT function is same as
one in MP3/WMA mode.
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the file name, folder name,
will be scrolling on the LCD display. As long as the
current playing
music contains relevant
tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display.
1. Press the SETUP button on the remote control to access the DVD System Menu on
the monitor.
2. There are 6 setup pages for the System Menu. Press the > or < button to select
desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a
desired mode of the setup item, finally press the OK button to confirm it.
*
Press the < button to return to the previous level.
*
Press the SETUP button again or use the direction buttons to highlight EXIT SETUP
and then press the OK button to exit the Setup Menu.
4.22 Playback MP4 files
4.23 ESP and
Function
song title, artist and album
4.24 DVD System Menu Setup Operation
MP4
MP3
ID3
ID3
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
Summary of Contents for BV9970
Page 1: ......
