INSTRUCTIONS
INSTRUCTIONS
08
11
00:00:09
00:04:48
Disc Function Operation
Play disc
Insert the disc into the disc slot with the printing surface up, system will detect the disc and
automatically take it in to read and play.
Eject disc
(1) Click button on the panel to eject the disc.
(2) If a disc has not been took away 15 seconds after it is ejected, system will automatically
take in the disc but not play.
Do not insert two discs or more.
2. DVD/VCD disc playback
During playback of disc, touch the middle lower area of the screen to pop up the touch
menu, operate the touch menu to perform various playback controls.
After a CD is inserted, system shall access disk reading state immediately.
When there is a disk in the device, click [Disk] at the main interface so as to access disk
reading state.
After the disk being read out, system shall automatically play in sequence.
4. MP3/JPEG/MPEG4 disk playing
When the disk contains readable files, such as MP3/JPEG/MPEG4 files, it shall be
automatically read out and played after slipping into DVD player.
During playing, touch the screen area and the touch menu shall pop up. Operate the
touch menu for playing.
1. Play/eject disc
3. CD Disc Playback
5. Touch Menu Function Description
The disc read, touch area of the screen, pop-up touch menu. Operate a variety of playback
controls the touch menu.
MUSIC function operation
Connect to Music first, touch [Music] icon on main interface to access Music interface,
as shown in below diagram.
Click icon return to a interface
Short press
next Song
Long press fast forward playback/rewind playback
previous Song/
Sound settings
Play/Pause
Loudness on/off
Back to the previous directory
Page up/down
Number Button
Random play
cycle play
External input operation
Connect the video input plug with external video input jack, and connect the audio input
plug with external audio input jack.
Touch [AV-IN] icon on main interface to access
external input interface.
Click icon into the sound settings screen.
Loudness on / off.
COMPASS
COUNTER
In the main interface touch [COUNTER] icon, into the counter interface.
function operation
function operation
In the main interface touch [COMPASS] icon, into a compass interface.
Steering wheel setting
Click the settings interface [STEER] icon into the steering wheel settings interface.
Steering steps:
The original line of control of the vehicle side, the positive,
the negative and machine side control line cathode, anode
connection after connection:
①
Touch [Reset] and press
above the steering wheel buttons one by one, and record the
appropriate sequence and function, touch [allocation].
The steering wheel buttons
②
Touch the desired distribution voltage value (such as: 2.00V).
③
select the appropriate settings (such as: ).
④
completed the steering wheel buttons will display the corresponding function.
⑤
After completing the settings, touch [OK] to save the settings.
⑥
For the reset function, can touch [Reset] (the original settings
will all be cleared), and repeat Step
② ~
Step
④
for resetting.
⑦
You can also choose to set a good model of the steering wheel.
Click the models select] icon pop-up model selection interface,
select your car type click OK icon to save the settings.
