Boss Audio Systems BV9380NV, User Manual

Page: 4 / 10

TROUBLE SHOOTING
PROBLEM CAUSE SOLUTION
After ignition switch
off ,setting
information all lose
Reset information and save
Change battery or fuse
Cannot power on
Change fuse same as the old one
Some factors cause MPU
wrong operation Press RES button on the panel by
penpoint, then, power on
Poor performance
of radio station
Cannot load disk There is a disk inside
Remove disc before inserting another one
Weak signal Move the car to another place, then research
Cannot play disc
Disc is scratched Change new disc
Put wrong side of disc into
the unit
Insert in the disk with sign side up
Clean lens by lens clean disc Lens is dirty
Cannot switch
language/subtitle
There is only one language/
subtitle in disc
If disc is not with multi-language/subtitle,
it cannot switch language/subtitle
No image
Other factors cause MPU
wrong operation
Press [RES] button on the panel by
penpoint, then, power on
Cannot watch
image during
driving
It’s not allowed to watch image
during driving
Park the car in a safe place, put the car stall
in “ P ” postion, pull up the hand brake,
parking brake wire must be grounded
Check fuse
This player is equipped with ISO standard connector, please follow below instruction:
●
Yellow – 12 V Constant
●
Black – Ground wire
●
Blue - Power Antenna / Remote Amp Turn On
●
Orange – Back-Up Camera Trigger (+)
●
Red - ACC ON (+12V)
●
Parking Brake (-)
●
White/White black - Left front speaker (+/-)
●
Purple/Purple black - Right rear speaker (+/-)
●
Green/Green black - Left rear speaker (+/-)
●
Grey/Grey black - Right front speaker (+/-)
ANT - FM/AM antenna
G1 - Red Rear RCA R output
G2 - White Rear RCA L output
G3 - Yellow VIDEO–OUT1
G4 - Brown Subwoofer output
G5 - Yellow Rear view input
G6 - Yellow VIDEO –OUT2
G7 - Red AUX R Audio input
G8 - White AUX L Audio input
G9 - Yellow Video input
E3 - White Learning SWC
E1 - Black Learning SWC GND
E2 - Brown Learning SWC
E4 - Dark grey with Red /White tip
Front RCA output (Right Red
Left White)
E5 - Rear USB Plug
E
1.Black GND battery -
2.Yellow BATT b
3.Red ACC switch control
4.Braking Wire
5.NC
6.CCD control
7.Blue ANT Radio automatic antenna
8.NC
9.Purple RR+ rear right s
10.Purple/black RR- rear right speaker –
11.Grey FR+ front right s
12. Grey/black FR- front right speaker –
13.White FL+ front left s
14.White/black FL- front left speaker –
15.Green RL+ rear left s
16. Green/black RL- rear left speaker –
B - GPS antenna
E6 - BT MIC
F
2
1 3 15
16 6 4
5 7 9 1113
8 10 14 12
5
G1 G2 G3
G4 G5 G6
G7 G8 G9
RR RL V - OUT1
V - OUT2
AUX-R AUX-L V-IN
C A M SW
D
ANT
E
F
B
5
D - Media
1.
Press this button will turn on power, during working longer press this button will turn off
power, on any mode, shortly press will return main menu, rotate this button will adjust
volume level.
2. MUTE button
Press this button to shut off sound output, repress this button to resume sound output;
Press this button longer to turn on/off TFT LCD display.
3. NAVI button
Press this button for the navigation.
4. RST
Press this button and this unit will be restored to the initial state.
5. Dual (front and rear) USB
Insert USB removable device so as to read audio/video files.
Warning: You can only use either front or rear USB at a time. Never connect both
front and rear USB at the same time! This could cause malfunctions.
6. Dual (front and rear) AUX
To input external audio.
Warning: You can only use either front or rear AUX at a time. Never connect both
front and rear AUX at the same time.
7. IR
To receive infrared signal from the remote control.
10.
Insert SD card, the unit will play the files automatically.
PWR/VOL button
8.
Press this button can eject the disc.
9. Disk load slot
Opening for disks to enter or retreat.
MAP/SD Slot
Insert map card to read navigation map data.
WIRING DIAGRAM BASIC FUNCTION