INSTRUCTIONS
.Number button 6 Long press 6/DIR+ to
select the next folder/short press to
play the +10 song
Under FM/AM radio status, touch the button
to get into the corresponding stored radio
channels. After searching for a station
manually, hold the button for 2 seconds to
save the station in the number button 6's
position.
Under USB playback status, touch the
button to select the +10 song cyclically.
Long touch the button to select the next
folder.
5. SEL Button
The function is the same as the function of
SEL button on panel.
6. Button
In radio/AUX mode, press the button to
return to the interface;
In USB/SD mode, press the button:
current interface
→
repertoire interface
→
interface.
7. / / / Button
In DVD mode, press “ ” button to select
the folder
→
AUDIO
→
IMAGE, press “ ”
button to select the next folder.
8. ENTER button
9. VOL+/- button
Press this button to increase/decrease
volume level.
10. Button
Press this button so as to switch between
play and pause.
11. Button
The function is the same as the function
of buttons on panel.
BATTERY CHANGE
When control distance of remote control
becomes shorter or no function, please
change battery. Please confirm polarity
before change.
One hand press stopper, then pull out
battery.
Put battery into controller.
Insert battery holder into controller.
Turn on/off
When the ignition switch is put in ACC or ON position, Press
button on the front
panel to turn on the unit. After the host starts, hold power button for 3 seconds, the host
will turn off.
Access main interface
Turned on, the interface to return the icon to switch to the main interface. As shown
below:
power
Touch the function icons so as to access the corresponding function operations.
USB/SD Card Operation
When there is a USB device/SD card connected, the unit can conduct the playback of
audio/video/image files in the USB device/SD card.
Insert/Eject USB storage device
1. Connect a U disc recorded with media information to the unit by a USB connecting
cable.
2. When there is a need to eject the USB device, exit the USB device playback screen
first, and then take out the device.
Insert/eject SD card
1. Insert a SD card recorded with media information into the SD card slot in the unit
correctly until it is locked.
2. When pulling out the SD card, exit SD card playing state first, then press the SD card
and it shall pop up after unlocking.
Enter/exit
Insert a USB storage device or SD card to automatically play data contained in it. If the
unit has connected with a USB device or SD card, touch [USB] icon in the multimedia
interface to enter into the external storage playback interface; Touch [SD] icon to enter
into the SD card playback interface. During playback, touch the top center area of the
screen to pop up the touch menu, operate touch menu to perform various playback
controls.
Play
After SD card/USB removable device being read out, you can by clicking the play files.
Native support for playback the MP5 formats (including: *. rm, *.rmvb, *.wmv, *.wma,
*.wav, *.dat, *.flv, *.asf, *.mov, *.DivX, *.vob, *.avi, *.fsm, *.mp3, *.mp2, *.mp4, *.mpg etc.)
All manuals and user guides at all-guides.com
