10
Basic Operation(Con’d)
8. Mute Control
Press the MUTE Button on the remote control to activate the mute function.
Press the button again to resume.
9. Bass
Press the VOL knob until the display shows “BAS”. Use the VOL DN/UP knob to
adjust. When EQ is ON, bass control is not available.
10. Treble
Press VOL knob until the display shows “TRE”. Use the VOL DN/UP knob to
adjust. When EQ is ON, treble control is not available.
11. Balance
Press VOL knob until the display shows “BAL”, then use the VOL DN/UP knob
to adjust the balance between the left & right speakers.
12. Fader
Press VOL knob until the display shows “FAD”, then use the VOL DN/UP knob
to adjust the balance between the front & rear speakers.
13. Clock
Press the CLK button on the panel to show the time on the display.
14. Loudness Control
Press the LOUD button on the front panel until the display shows “LOUD OFF”
indicates that the loudness function is OFF. Press the LOUD button again to turn
the LOUD ON.
15. Sub Switch
Press the VOL knob repeatedly until display shows “SUB OFF“, then use the
VOL DN/UP knob to cycle between SUB ON and OFF, leave the unit idle for
setting to take effect.
16. Preset Beep Sound Off
Press the SEL button repeatedly until display shows “BEEP OFF”, then use the
VOL DN/UP knob to cycle between BEEP ON and OFF, leave the unit idle for
setting to take effect.