background image

Bluetooth Wireless Device Operation

Pairing Your Mobile Phone

Before using Bluetooth functions, you must pair your mobile phone and the unit. 
Pairing is a special process used when two devices connect for the first time. 
The pairing process is used to generate a link key that is used for authentication 
purposes for future Bluetooth  connections between devices. Your mobile phone 
can initiate a search for a new device and pair the unit. 

1.

 Access the mobile phone’s Bluetooth function and set the Bluetooth function

to on

2. 

Use the mobile phone’s add a new device feature. “BOSS AUDIO” appears 

in the list on your mobile phone.

3.

 Select “BOSS  AUDIO”. The unit has an auto pairing function. It will search for 

the Bluetooth mobile phone and pair automatically. A prompt to connect should 
appear on your mobile phone. Accept the request and initiate the process
NOTE:  Some  mobile  phones  require  a  “pass  key”  or  pairing  code  to  connect. 
If  your  phone  requires  a  pass  key  or  pairing  code,  you  will  need  to  enter  this 
number. The default pairing code for the unit is “0000”.
  Plug  the  USB/SD  card  into  the  USB/SD  port.  The  unit  will  play  the  contents 
automatically.

Auto-Reconnection

This unit has a built-in auto-reconnection function. In some conditions, the unit 
will  auto  reconnect  with  the  mobile  phone  (note:  the  mobile  phone  must  have 
been paired with the unit before.)
• When you turn off the unit and then turn it on again.
• Switch off the ACC wire and switch it on again.

Managing Incoming Calls

Answering an Incoming Call

Press the GREEN button to answer an incoming call.

Rejecting an Incoming Call

Press the RED button to reject the incoming call.

Summary of Contents for BV7260B



















Reviews: