background image

- 1 -

BPRZR5

IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY 

POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT

INSTALLATION MANUAL

INSTALLATION MANUAL

BPRZR5

IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY 

POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT

BPRZR5

IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT

Congratulations on your purchase of a 

 POWERSPORTS product.

Table of contents 

Introduction and features ................................................................................................................................1
Delivery content ................................................................................................................................................2

Specifications

 ...................................................................................................................................................2

Disassembly ......................................................................................................................................................3
Wiring overview ................................................................................................................................................6
RZR-10A Subwoofer enclosure installation  ..................................................................................................8
RZR-FSA Front Speaker enclosure installation ...........................................................................................11
RZR-62A Rear Speaker enclosure installation ............................................................................................15
MGV550B Source Unit connection ...............................................................................................................18
MGV550B Source Unit installation ................................................................................................................21

Introduction and features

•  Estimated Installation Time: 4 HOURS

•  True “Plug and Play” components.
•  No drilling or cutting required.
• 

Kit includes everything needed for installation and will fit every model RZR XP1000 from 2014 to current 

year (Not Compatible with Ride Command).

• 

Each IPX6 rated component is self-powered with a high-powered amplifier that is matched to the speakers 

perfectly.

• 

Direct fit installation designed specifically for the Polaris RZR XP1000.

• 

Rugged kit mounts to components designed to withstands harsh outdoor environment.

• 

Speaker & Sub enclosures integrate with no loss of passenger space.

• 

Source unit Dash install kit includes upper and lower kits that fit RZR models from 2014 to current models.

Installation/Disassembly tools required

• 

T40 Torx

•  Panel tool or Flathead screwdriver
• 

Metric/Standard sockets

• 

Ratchet with extension

• 

#2 phillips screw driver

•   Allen Key Set

Summary of Contents for BPRZR5

























Reviews: