Installation
1. Use a lint-free cloth to wipe off dust on the location of the windshield where you want
to install the product.
2. Remove the protective film from the bracket suction cup, and place it on the windshield.
It is recommended the BCAM50 be placed as high and close to center as possible. Take
note, the BCAM50 should not be placed in any place where it might prohibit safety or
restraint systems from operating properly.
3. Attach the BCAM50 to the window bracket.
4. It is recommended to run the wire along the top of the headliner, down the passenger
A-Pillar* and toward the power input. DO NOT POWER ON yet.
5. Power on the BCAM50 and align camera on center.
6. Ensure all the adjustments on the bracket are tight and secure before the vehicle is
moved.
* If the vehicle is equipped with an airbag(s) on the A-Pillar, carefully place the wire
where it will NOT prohibit the airbags from inflating. If you are uncertain or
uncomfortable with continuing the install, seek a professional installer.
Summary of Contents for BCAM50
Page 12: ......
