B6RGB
6.5” (165 mm) 2-Way Marine/Powersports
Roll Cage/Waketower Speaker Pods
As illustrated, secure the aluminum bands to the
metal base using a pair of M6 x 60mm screws,
M6 flat washers, and M6 locknuts. The locknuts
must be installed into the hex shaped recess on
one end of each aluminum band.
Hand-tighten the screws to the degree which
allows just enough freedom to rotate the speaker
around the cage bar.
Speaker installation now completes.
Wiring
12V wire harness connection
LED wire
LED wire
Black -
Gray +
AUX input
1)
Audio output
2)
ACC wire
(red)
3)
Remote out
wire (blue)
Ground wire
(black)
Battery wire
(yellow)
DC12 (-) grounded to
metal chassis, or directly
to negative polarity of battery
DC12 (+) extention
power cable with fuse
holder (not included)
1)
Connect the RCA plugs (red/white) to an external amplifier
for audio output.
2)
Connect the ACC wire (red) to the accessory power of the
vehicle as ON/OFF switch of the speakers.
3)
Connect the remote out wire (blue) to an external amplifier
as ON/OFF switch of the amplifier.
