!9.��
�
0)
PAIRING
&
DISCOVER/NG A NEW BLUETOOTH CONNECTION
1) Power on the
A TV95LRGB
by pressing the G)Play/Pause button momentarily,
then long press the BLUETOO:t"H@)button, it will start to quickly flash blue color,
signaling that the ATV95LRGB Is now ready for Bluetooth pa1nng.
NOTE:
You have 2 minutes before you must restart this procedure over again.
2)
Now
that the
ATV9SLRGB
is in pairing mode:
ANDROID users:
a. Go into the
Settings Menu
of your device
b. Enter the
Bluatooth Menu
c.
TURN ON Bluetooth
and press
SCAN
d.
"BOSS AUDIO ATV"
will now be displayed under
AVAILABLE DEVICES
e. If prompted, enter passcode:
·oooo··
iOS users:
a. Go into the
Settings Menu
of your
/OS
device
b. Enter the
Bluetooth Menu
c.
TURN ON Bluotooth
d.
"BOSS AUDIO ATV"
will now be displayed
e. If prompted, enter passcode:
"0000"
4) II
BOSS AUDIO ATV
is not seen, repeat the above steps and refresh the
"Device List"
5) You will hear a tone when the connection is successful, you are now ready to stream
music from your favorite media player to the
A TV9SLRGB
NOTE:
You have 2 minutes before you must restart this procedure over again.
RECONNECT/ON
1) ) Power on the
A TV95LRGB
and your last paired device Bluetooth.
2) The unit wlll now automatically reconnect
3) 3) II your device was previously paired with the
MFC
but it wasn't the last paired
device:
a .. Ensure no other devices are currently pair
b .. Enter the
Bluetooth Menu
on your device being paired
c.
"BOSS AUDIO
ATV"will display under
AVAILABLE D E VICES
d .. Choose
the"BOSS
AUDIO A TV"
to reconnect
4)) If the device is out of range from the
AMSLRGB,
it will disconnect automatically:
a. To reconnect once device is back in range, press theG)P/ay/Pause button
b. The
ATV95LRGB
will now reconnect to the device
To avoid battery exhaustion, be sure to occasionally run the
vehicles engine while using this product.
Usinn this nroduct wilhout runnino the enoine can drain the batterv.
Summary of Contents for ATV95LRGB
Page 8: ......