Thank you for purchasing this
ATV6.5B All-Terrain Sound System
Please read through these instructions carefully so you will know
how to operate your model properly.
After you have finished reading the instructions, keep this document
in a safe place for future reference.
Before You Start
Read and understand all instructions before you use your product. If you do not follow the instructions
in this manual, we are not responsible for injury or damage resulting from improper handling. This will
also void the warranty.
Important Safety Precautions
• Be sure to observe the following guidelines:
- Do not increase speaker volume so high that you cannot hear what is around you.
- Use caution or temporarily discontinue use in potentially hazardous situations.
• Do not make any adjustment on the product when driving or in other situations where distractions can be
hazardous. Responsible and safe driving is your primary responsibility when operating a vehicle.
• Start volume at a low setting then gradually increase the volume until you can hear it comfortably, without
sound distortion and ear discomfort.
• In the event of smoke, strange noise or odor emitted from the product or any other abnormal operational
signs appearing on the product, disconnect the product from the power supply. Discontinue use and contact
your dealer or our technical support. Using the product in this condition may result in permanent damage to
the system.
• Servicing must only be carried out by a technician. Contact our technical support for any service question.
Installation Precautions
• WARNING: Always consult a professional installer.
• Installation must be performed by a professional. Contact our technical support for any installation question.
• Observe the safety and operating instructions of the devices which are connected to the product.
•
Only use attachments/accessories specified by the manufacturer for installation.
• Do not modify this product, as this affects the safety of the product. Risk of injury or damage to the product.
• Before installation, disconnect the negative terminal of the vehicle battery to prevent damage to the product,
fire, and/or possible injury.
Care for Your Product
•
DO NOT
clean the product in hot weather (e.g. hot sunlight).
•
DO NOT
use abrasive or highly alkaline cleaner on the product.
•
DO NOT
use gasoline, acetone, carbon tetrachloride or other aggressive chemical solutions on the product.
•
DO NOT
scrape the product with razor blade or other sharp instrument.
• This product is water resistant. However, never submerge the product to water.
• Wash the product with lukewarm water and mild soap or detergent, using a clean sponge or soft cloth. Rinse
well with clean water.
Mounting
Mounting on ATV or UTV
Always consult technical personnel if you are in doubt about installation.
Use only the supplied accessory for mounting. Using other mounting methods may void the warranty.
To ensure safety of the mounted sound system, always check the mounting conditions (e.g. mounting
straps) of the sound system before each vehicle ride.
1.
Using the two supplied mounting straps and zip ties, secure the sound system on the rails or roll bars of
the vehicle, as shown in the figure below. Make sure the sound system is securely attached to your vehicle.
No special tool is required when mounting the sound system on ATV or UTV.
The illustration is for reference only. Your vehicle may vary.
Power Connection
Power Connection to Cigarette Lighter Socket (Option 1)
The sound system can be powered by direct connection to your vehicle cigarette lighter socket as an optional
power supply.
See “Before You Start” section for installation precautions.
This sound system is operated with 12 V DC vehicle voltage. Never connect the sound system to any
other voltage supply (e.g. 24 V DC power supply in trucks or buses).
1.
Simply insert the cigarette lighter plug of the sound system into your vehicle cigarette lighter socket. When
the power supply is connected, the power LED indicator lights up.
Connection to the cigarette lighter socket
Vehicle cigarette lighter plug
2
THIS PACKAGE CONTAINS
1x All terrain sound system (with a cigarette lighter plug)
1x Cigarette lighter plug adapter
1x AUX cable with 3.5 mm plug
2x
Mounting 2x Nylon zip ties
1x
User 1x Warranty card
IMPORTANT
Please enter below the Serial No. which is located on the exterior of the product. Retain this
information for future reference.
Model
Serial No.
Date of Purchase
Getting to Know Your ATV6.5B
Introduction
The product is a Bluetooth speaker system which is ideal for installation in a ATV (All Terrain Vehicle) or UTV
(Utility Vehicle). Through Bluetooth connection, audio can be streamed from a mobile phone to this product and
a hands-free function is available for voice call. With the 3.5 mm audio cable connection, music from an audio
device (e.g. a mobile phone or MP3 player) can be played on this product.
This product is shockproof and water resistant. This product is operated with 12 V DC vehicle power supply.
Never connect this product to any other voltage supply.
Please read this manual carefully so you will know how to operate your product properly. After you have finished
reading this manual, store it in a safe place for future reference.
Product Overview
1
2 3 4
5
1
Speaker
2
Power LED indicator
3
Vehicle cigarette lighter plug
4
AUX input jack (3.5 mm)
5
Speaker
3
4
5
Power Connection
Power Connection to Vehicle Battery (Option 2)
The sound system can be also powered by connection to your vehicle battery as an optional power supply.
See “Before You Start” section for installation precautions.
To avoid short circuits and any resulting damage to the sound system, the negative terminal of the car
battery must be disconnected first.
We recommend a fuse and fuse holder (both not included) with minimum rating of 15 A are in line with
the positive terminal of the vehicle battery.
The ground cable length should not exceed 18” (45.7 cm).
1.
Connect the black wire of the cigarette lighter plug adapter to the chassis ground point.
2.
Connect the red wire of the cigarette lighter plug adapter to the positive terminal of the vehicle battery using
12 - 14 gauge wire (not included).
We recommend installing a relay and 15 A fuse and fuse holder in line with the vehicle battery (Relay, fuse
and fuse holder are not included). See the illustration below.
3.
Connect the cigarette lighter plug of the sound system into the cigarette lighter plug adapter.
When the power supply is connected, the power LED indicator lights up.
Black ground wire
Chassis ground point
3
15 A
2
1
Cigarette lighter plug
Cigarette lighter plug adapter
Red power wire
Chassis ground point
Battery
15 A fuse
with fuse holder
12 - 14 gauge wire
with relay
6
1
ATV6.5B
USER’S MANUAL
BLUETOOTH®
| AMPLIFIED ALL-TERRAIN SOUND SYSTEM
FEATURING 6.5" MARINE SPEAKERS AND 1" WATERPROOF TWEETERS
ATV6.5B
USER’S MANUAL
BLUETOOTH®
| AMPLIFIED ALL-TERRAIN SOUND SYSTEM
FEATURING 6.5" MARINE SPEAKERS AND 1" WATERPROOF TWEETERS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS Audio
Systems is under license. Other trademarks and trade names are those of their respective owners.
0521
BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support
