7
AUX IN
STATION PRESETS Six numbered preset button store and recall sta-
tions for each band.
Storing a station:
1. Select a band (if needed)
2. Select a station
3. Hold a preset button longer than one second. Preset station num-
ber appears in the display when station is saved.
Recall a station:
1. Select band (if needed)
2. Press a preset button for less than one second to select stored sta-
tion.
RADIO CONTROLS
TUNE BUTTONS When pressed for less than 1 second, these keys operate
as manual tuning mode.
When pressed longer than 1 sec., they are operated as SEEK tuning mode.
If the keys are not pressed for 3 seconds, they will return to SEEK mode
again.
AS/PS Select six strong stations and store them in current band.
1. Select a band (if needed)
2. Hold A/PS button for more than three seconds. The new stations
replace stations already stored in that band.
Preset Scan
Scan stations stored in current band
1. Select a band (if needed)
2. Touch A/PS for more than one second but less than three seconds.
Radio pauses for five seconds at each station. Touch A/PS again to stop
scanning when desired station is reached.
SCAN This key is operated as RADIO SCAN. The operation is similar as
normal search but different thing is holding 5 seconds on every station
detected in RADIO SCAN mode.
BAND Push this switch to select the desired band. Selection is made in
regular sequence as FM-AM.
SETTINGS MODE When press this button for more than 2 seconds, it is
activated as selecting mode of these function.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when
station is detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user
push SEEK button. When release this SEEK button, then stop when station
is detected.
ESP
SEL
SEL
SEEK
SEL
SEL
2 sec.
MULTI
BEEP
SEEK1 / SEEK 2
VOL
