Page 6
Page 5
5x15mm
support screw
5mm nut
support screw
support strap
dashboard attachment
surface
head unit
support screw
mounting case
Installation
Figure 1 Bending the support tabs
Figure 2 Forming the support bracket
Figure 3 Insert levers unit
“
click
”
occurs,
then use levels to pull out head unit.
Operation of Remote Controller
1.SOURCE(Input select, same as
MODE on the head unit)
2.EQ(Preset Equalizer Curves)
Press repeatedly to cycle through these modes:
FLAT, CLASSIC, ROCK, POP, USER SET.
3.MUTE
Press this button to silence the audio. Press again
to restore the previous audio volume level.
4.LOC
In some areas, reception of an AM station may be weak.
Changing the reception mode to LOC by pressing this
button allows the receiver to skip the weaker signals.
Press again to return to DISTANT mode.
5.RDM/MO/ST
In some areas, reception of an FM station may be weak. Changing the
reception mode to MONO by pressing this button may improve the reception.
Press again to return to STEREO mode.
6.AMS
In Radio mode, press this button to play each preset number for several
seconds; press and hold this button to searches from the current frequency
and checks the signal strength level until 6 station are found. And then the 6
station frequency are preset to the corresponding preset memory numbered
bank. The auto-storage operation is implemented in each selected band.
When the auto-storage operation is finished, the radio execute the Preset scan.
7.Press this button to activated as LOUDNESS mode on or off.
8.BAND
Press briefly, repeatedly to cycle between the five radio bands:
FM1 > FM2 > FM3 > AM1 > AM2
9.10+
In USB/SD Card mode, press this button to add 10 tracks in the current folder .
10. TRACKS SELECT
In USB/SD Card mode, press these button to choose the track.
1
6
2
3
5
9
4
7
10
8
Summary of Contents for 615UA
Page 1: ......
