5
General Operation
Adjust Menu Options (SEL)
• Press
SEL
button repeatedly to cycle through the following adjustable
audio functions:
- ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings.
- BASS/TREBLE:-7, -6, ~, 1, 0, +1,~, +6, +7
Note: BASS and TREBLE settings are only enabled when EQ setting is turned OFF.
- BALANCE:L7, L6,~, L1, L=R, R1,~,R6, R7
- FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode
for radio frequencies.
- CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
• Rotate the
VOL
knob to adjust the selected item.
Setting the Clock
Press the
CLOCK
button to display time. Press and hold the
CLOCK
button,
the hours digits start flashing on the display. Set hours by rotating the
VOL
knob. Briefly press the
CLOCK
button. The minute digits start flashing.
Set minutes by rotating the
VOL
knob.
Finally press the
CLOCK
button to confirm your settings.
LCD Display
Mute On/Off
In power on mode, briefly press the
MUTE
button to toggle mute on or off.
USB Port
Hands-free Microphone
Auxiliary Input Jack
Reset
Push the
RESET
button with a thin object with a pointed end to reset all
parameters to factory default settings.This function may be used when the
LCD does not display normally or sound is distorted, or when any of controls
are disabled.
