Operating Instructions
BöSha GmbH + Co. KG · Industriegebiet Heidberg 10 · D - 59602 Rüthen
P h.: ++4 9 - (0 )2 9 5 2 – 9 7 0 9 1 -0 · Fax: ++4 9 - (0 )2 9 5 2 – 9 7 0 9 1 -1 5 0 · Email: info @b o esha.d e ·
www.b o esha.d e
MU/26.04.2016 13:33:00/BS671.doc 26.04.2016 13:33:00
to the heat generation of the projector, so that it may be necessary to wait for a couple of minutes before the
projector is opened.
To open the projector the screws of the lid have to be undone. Now the illuminants are accessible and can be
exchanged. When installing ensure a firm fit of the lamp holders. Lamp holders with defect contact elements
have to be exchanged immediately.
Repairs of explosion-proof projectors may only be carried out by authorized personnel and by using original
spare parts of the manufacturer.
Special conditions have to be observed, if applicable.
When installing electrical equipment in potentially explosive atmospheres EN 60079-14 has to be complied
with.
ATTENTION !!!
Before starting operation store the projectors in a dry place, protect against moisture!
