Boser HS-6254, User Manual, Page: 19 / 68

13
NOTE: LVDS cable should be produced very carefully. Y0- & Y0+ have to
be fabricated in twister pair (Y1- & Y1+, Y2- & Y2+ and so on)
otherwise the signal won’t be stable. Please set the proper voltage
of your panel using JP10 before proceeding on installing it.
NOTE: If use CN9 only, it just supports 24-bit single channel LVDS panel;
If you want to use 48-bit dual channel LVDS panel, please use CN9
and CN10 combined.
The HS-6254/HS-6654 has an onboard jumper that selects the working
voltage of the flat panel connected to the system. Jumper
JP10 offers
two voltage settings for the user.
JP10: Panel Voltage Select
Options Settings
+5V Short 1-2
+3.3V (default) Short 2-3
1
3
CN1: Inverter Power Connector
PIN Description
1 N/C
2 N/C
3 +5V
4 BK_EN
5 ENVDD
6 GND
1
6