Boser HS-4701, Manual

Page: 37 / 64

31
4.9 Peripheral Setup
The IDE hard drive controllers can support up to four separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
On-chip Primary PCI IDE [Enabled] Item Help
IDE Primary Master PIO [Auto] Menu Level X
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
On-chip Secondary PCI IDE [Enabled]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA [Auto]
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
AC97 Audio [Auto]
Init Display First [PCI Slot]
IDE HDD Block Mode [Enabled]
POWER ON Function [BUTTON ONLY]
KB Power ON Password [Enter]
Hot Key Power On [Ctrl-F1]
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [Normal]
RxD, TxD Active [Hi, Lo]
IR Transmission delay [Enabled]
UR2 Duplex Mode [Half]
Use IR Pins [IR-RX2TX2]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
EPP Mode Select [EPP1.7]
ECP Mode Use DMA [3]
PWRON After PWR-Fail [Off]
Midi Port Address [330]
Midi Port IRQ [5]
Onboard Serial Port 3 [3E8]
Serial Port 3 Use IRQ IRQ10]
Onboard Serial Port 4 [2E8]
Serial Port 4 Use IRQ [IRQ11]
: Select Item + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults