Boser HS-4010, Manual

Page: 5 / 45

3
Chapter-1
General Information
The HS-4010 is an all-in-one half size industrial single board with
design in Novell NE2000 compatible 16 bits ISA bus Ethernet, provides
10 BASE-T for directly network automation demand.
Supports for various 40-133 MHz 80486SX/DX/DX2/DX4, 5x86 CPUs
with 32-bit data bus and processing ability. Up to 64MB RAM by 72-pin
SIMM supported. Provides "DiskOnChip
?
" socket supported memory
size up to 72 MB.
Desinged with the on board 1MB memory VGA architecture, supports
direct interface to color and monochrome Single Drive (SD) and Dual
Drive (DD) STN, TFT & EL panels and resolutions up to 1024x768 256
colors to CRT monitor.
The HS-4010 support completed with all necessary I/O for industrial
application. Two PCI enhanced IDE ATA-2 IDE drivers; supports up to
two floppy disk drivers; provide two high speed serial RS-232 ports port
with compatible to 16C550 UART with 16-byte FIFO; one enhanced
bi-directional parallel port which support SPP/EPP/ECP. The board
also provides keyboard and PS/2 mouse connector.