Boser HS-2622, Manual

Page: 20 / 36

14
CN16: External USB2.0 Port
PIN Description PIN Description
1 +5V 6
2 +5V 7 GND
3 DATA_4- 8 GND
4 9 N/C
5 DATA_5- 10 N/C
NOTE: This mainboard provides 1 USB header on the board allowing for 2
additional USB ports. To make use of these headers, you must attach
a USB bracket/cable with USB ports (some models will come
packaged with a USB 4-port bracket-cable). The optionally packaged
bracket will have two connectors that you can connect to the headers
(CN16). The other end (bracket containing the USB ports) is attached
to the computer casing.
NOTE: If you are using a USB2.0 device with Windows 2000/XP, you will
need to install the USB2.0 driver from the Microsoft® website. If you
are using Service Pack 1 (ort later) for Windows® XP, and using
Service Pack 4 (or later) for Windows® 2000, you will not have to
install the driver.
3.12 CMOS Data Clear
The HS-2622 has a Clear CMOS jumper on JP1.
JP1: Clear CMOS
Options Settings
Normal Operation (default) Short 1-2
Clear CMOS Short 2-3
3.13 Power and Fan Connectors
HS-2622 provides one 4-pin power in at CN16. Connector FN1
onboard HS-2622 is a 3-pin fan power connector.
CN2: Power Connector
PIN Description
1 5VSB
2 GND
3 Power On