Boser BPF-3315-Z, User Manual

Page: 49 / 66

41
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
IDE HDD Block Mode [Enabled] Item Help
IDE DMA transfer access [Enabled]
On-Chip Primary PCI IDE [Enabled]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
On-Chip Secondary PCI IDE [Enabled]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA [Auto]
** On-Chip Serial ATA Setting **
On-Chip Serial ATA [Enhanced Mode]
SATA PORT Speed Settings [Disabled]
X PATA IDE Mode Secondary
SATA Port P0, P2 is Primary
↑↓← →
: Select Item +/-/PU/PD: Value F10: Save Esc: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Azaliz/AC97 Audio Select [Auto] Item Help
↑↓← →
: Select Item +/-/PU/PD: Value F10: Save Esc: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
SuperIO Device
Onboard Serial Port 1 [3F8/IRQ4] Item Help
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [Normal]
X RxD, TxD Active Hi, Lo
X IR Transmission Delay Enabled
X UR2 Duplex Mode Half
X Use IR Pins IR-Rx2Tx2
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
X EPP Mode Select EPP1.7
X ECP Mode Use DMA 3
↑↓← →
: Select Item +/-/PU/PD: Value F10: Save Esc: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults