BOSER Technology BPF-3215-V, User Manual

Page: 35 / 66

27
----------------------------------------------------------------
Configure reset time interval
----------------------------------------------------------------
MOV DX, 2EH
MOV AL, F6H
OUT DX, AL
MOV DX, 2FH
MOV AL, 05H ; Setup reset time 5, User can setup from 1~255
OUT DX, AL
4.17 Audio Connectors
The HS-2616 has an onboard AC97 3D audio controller. The following
tables list the pin assignments of the Line In/Audio Out connector.
z CN9: MIC In/Line Out Connector
PIN Description PIN Description
1 2
7 8
1 AOUTL 2 AOUTR
3 GND 4 GND
5 MIC IN 6 N/C
7 GND 8 GND
4.18 CompactFlash

Connector
The HS-2616/HS-2616M also offers a Type I/II CompactFlash

connector which is IDE interface located at the solder side of the board.
The designated
CN18 connector, once soldered with an adapter, can
hold CompactFlash

cards of various sizes. Please turn off the power
before inserting the CF card.
z CN18: CompactFlash

Connector
PIN Description PIN Description
1 GND 2 IDE_PDD3
3 IDE_PDD4 4 IDE_PDD5
5 IDE_PDD6 6 IDE_PDD7
7 IDE_PDCS1# 8 GND
9 GND 10 GND
11 GND 12 GND
13 +3.3V 14 GND
15 GND 16 GND
17 GND 18 IDE_PDA2
19 IDE_PDA1 20 IDE_PDA0
…MORE ON NEXT PAGE…