Bosean Electronic Technology Co.,Ltd
www.bosean.com
Tel:86-371-86533226
Email:
- 5 -
Parameter setting of the detector
Display
Description
Fig5
Fig6
Fig7
1. Alarm record:
Move the cursor to Alarm record, press
to
enter it as figure 5: Press the
and
keys to
scroll. You can also press
to return to the menu
settings page. Press the button
in the alarm
record interface, shown in Figure 6: Press the key
to indicate Yes, the page will show Figure 7: Please
clear the record later. Press the key
again to
enter the normal detection interface. If press
, the
record will not be cleared and the interface will go
directly to the menu setting screen.
Fig8
Fig9
Fig10
2. Low alarm settings
Press the button
in the menu interface, the
interface shown in Figure 8: press key to enter low
alarm set interface show as Figure 9:
press the
button
to increase the value, press
to
decrease the value, press the key
to cancel the
operation, the instrument directly into the menu page,
press the button
means save currently selected
value, interface as shown in Figure 10: the instrument
directly into the menu screen, press the button
again, the instrument enters the normal detection
interface.
If there is no special requirement, the alarm
parameters should not be modified
