22 - English
ADAPTiQ
®
Performing the ADAPTiQ
®
calibration
What you need:
SoundTouch
™
controller
ADAPTiQ
®
headset
The ADAPTiQ
®
audio calibration system customizes the sound of your system to
the acoustics of your listening area.
Note:
You must complete SoundTouch
™
setup before performing ADAPTiQ
®
audio
calibration. See “Adding the system to your Wi-Fi
®
network” on page 10.
To perform a calibration, you need about ten minutes when the room is quiet.
While wearing the special headset, the system prompts you to sit in five different
locations in your listening area as the system takes measurements in each one.
Audio prompts from the system guide you through the process.
1.
Plug the ADAPTiQ
®
headset into the
Audio IN
connectors in the back
of the Acoustimass
®
module. Be sure to match the colors, red-to-red
and white-to-white.
Right (R, red)
Left (L, white)
ADAPTiQ
®
headset
2.
Put the headset on your head so the left and right sensors rest above your
ears. This headset allows the system to hear exactly what you hear.
