PowerMatch® PM4500 / PM4500N
configurable power amplifier
TECHNICAL DA
TA SHEET
Bose
Professional Systems Division
3
OF 7
p r o . B o s e . c o m
General
Setup and Configuration Software
ControlSpace® Designer™ software V3.2 or greater
PC Interface Connection
USB (Network version adds Ethernet RJ45)
Fault Notification Output
NC/NO Relay Contact (1 A, 30 VDC), 3-pin Phoenix Contact® connector (orange color; part # 1976010)
Footnotes:
1
Output power is measured per channel, all channels driven, using test signals at 1 kHz.
2
Configuration not recommended / not optimal.
3
Derated use available. Refer to the application note "Using MONO Mode (single channel) to Drive High Impedance Loudspeaker Loads".
4
Measured at +24 dBu sensitivity unless otherwise specified.
