background image

14

S

YSTEM

 S

ETUP

English

TAB 6

TAB 8

TAB 7

TAB 3

TAB 5

TAB 2

TAB 4

Applying rubber feet

When placing the Acoustimass

®

 module on bare floors, 

you can attach the included rubber feet to the bottom 
of the module for greater stability and to protect your 
floor.

Vibration can cause speakers to move, particularly if 
placed on a smooth surface like glass or highly 
polished wood. If you are placing the center speaker on 
such a surface, you can attach the included rubber feet 
to the bottom of the speaker for greater stability.

If you have setup problems

If you experience any difficulties during the setup 
process, such as an unrecognized device remote or 
a connection error, you can reactivate the interactive 
setup mode at any time and correct or change part of 
your system setup. See “Using the Setup Mode” in 
your system operating guide.

For help in trying to resolve any problems, see the 
troubleshooting table in your system operating guide.

Contacting customer service

For additional help in solving problems, contact Bose

®

 

Customer Service. See the address sheet included in 
Kit 4.

Bottom panel

Rubber feet 
for 
Acoustimass 
module

Rubber feet 
for 
front center 
speaker

Bottom panel 
of center 
speaker

Applicable only for LIFESTYLE

®

 V25 and V35 

home entertainment systems

“Made for iPod” means that an electronic 
accessory has been designed to connect 
specifically to iPod and has been certified by 
the developer to meet Apple performance 
standards.

Apple is not responsible for the operation of this device or its 
compliance with safety and regulatory standards.

iPod and iPhone are trademarks of Apple, Inc., registered in 
the U.S. and other countries. All other marks are registered 
trademarks and trademarks of Bose Corporation.

ResoluteVigilantSetup.book  Page 14  Monday, December 7, 2009  11:59 AM

Summary of Contents for LIFESTYLE AM324443



















Reviews: