English
AM189858_03_V.pdf
December 20, 2001
27
Using the system with external components
Follow the instructions on page 11 for connecting components.
Turn on your component directly or by using its remote control. Press VOLUME
▲
or
▼
on
your Personal™ music center to raise or lower the volume. Control all other functions at the
source, referring to its owner’s manual if necessary. To begin, make sure the component is
turned on and a tape, CD, DVD, laserdisc, etc. is loaded. If an external component sounds
significantly louder or softer than other sources, see “Equalizing the volume levels of external
sources” on page 29.
Note:
The Lifestyle
®
40 music system cannot tur n a connected component on or off.
Turning the system on and selecting the component
Press VIDEO 1, VIDEO 2, AUX, or TAPE on your Personal music center to select the desired
component. This turns your system on and selects the component connected to that input. If
the system is already on, this button selects the component.
The appropriate display indicator appears when the system is on and the component is
selected.
CAUTION:
The magnetic field from the Acoustimass
®
module is not an immediate risk to
your video tapes, audio tapes, and other magnetic media. However, you should not stor e
tapes directly on or near the Acoustimass module.
Using a tape recorder with your system
If you are listening to any source except TAPE, the output signal of that source is directed to
the RECORD OUT jacks.
Note:
The ROOM outputs of the Lifestyle
®
40 system are designated by the letters A through
D. In a multi-room system, the sour ce that is playing in the room designated by the letter
closest to the begining of the alphabet is sent to the RECORD OUT jacks.
You may also specify a source to be directed to the RECORD OUT jacks even if you are not
listening to that source. To do this:
1. Select
RECORD OUT
with the MENU button. The words
RECORD OUT
are displayed
under the source display area (Figure 31).
2. Select a source to record. The selected source appears in the source display area in place
of the dashes (Figure 31). If you want to remove your
RECORD OUT
selection, press
CLEAR. The dashes reappear.
The selected source stays on until you turn
RECORD OUT
off. If the CD changer is
selected for
RECORD OUT
, it shuts off after 24 hours if you have not turned it off sooner.
3. When you are ready, set the tape deck to record.
Figure 31
The RECORD OUT MENU
display
Operating Your Lifestyle
®
40 Music System
