AM193147_03_V.pdf
December 20, 2001
11
Figure 10
Music center connectors
Figure 12
Connecting components to the
music center inputs
Cable TV
Setting Up
Laserdisc
VCR
Audio
out
TV
Video
Audio
out to TV
out
(2) To direct your video sound sources through your VCR
If your TV is not a stereo model, or does not have the appropriate outputs, connect your
stereo VCR to the music center. Use the VCR as a tuner to select other connected sound
sources. See Figure 11.
• Connect your home theater components to the appropriate VCR inputs.
• Connect the VCR video out signal to the TV through VIDEO IN or composite video
input. You can also use the RF (coaxial or 75
Ω
) or antenna input.
• Turn the TV speakers off or the volume all the way down.
(If there is an internal/external speakers switch, select external speakers. Do not
connect any speakers to the TV.)
• Connect the VCR fixed audio outputs to the VIDEO 1 or 2 inputs of the music center.
Note:
To ensure proper stereo or surround sound, connect the L and R audio outputs from
your stereo VCR directly to your music center L and R VIDEO 1 or 2 inputs, as shown in
Figure 11. If you prefer to connect the audio outputs from your TV to the music center, be
sure to use the audio (L and R) and video outputs from the VCR to the TV. If the audio signal
passes through two coaxial cable connections (like the connection from a cable TV box), in
some cases the stereo or surround encoding may be lost.
(3) To connect components directly to the Lifestyle
®
music center
If you cannot (or do not choose to) use your TV or VCR to select the sound sources, con-
nect up to three sound sources directly to the Lifestyle
®
music center. For example, connect
a VCR into VIDEO 1, a laserdisc to VIDEO 2, and a TV’s fixed audio outputs to AUX on the
music center. See Figure 12. By pressing VIDEO 1, VIDEO 2, or AUX on the remote control
or SOURCE SELECT on the music center control panel, you choose which sound source to
hear.
Note:
Selecting VIDEO 1 or 2 on your Lifestyle
®
system automatically selects SURROUND
(5-speaker) mode, and selecting AUX or TAPE automatically selects STEREO (2-speaker)
mode. If you wish, you can change the speaker mode after you select the source.
About the video source
Your TV is the display for the video (picture) signal. Therefore, the video signal must be
connected directly to the TV. The video signal should not be connected to the Lifestyle
®
music center.
Note:
For assistance with video connections, see your video components manuals.
Note:
There is no video signal input (usually a yellow-coded jack) on the music center. The
music center VIDEO INPUT jacks are for audio from a video source.
Cable TV
Figure 11
Connecting components through
your VCR
Laserdisc
VCR
Video out to TV
Audio out
TV
