Bose L1 model 1S system Owner'S Manual Download Page 3

3

Venice_SafetyInstructions.fm  4/12

English

Deutsch

Français

Dansk

Español

Italiano

Svenska

Nederlands

Italiano

Svenska

Deutsch

Nederlands

Français

Español

I

MPORTANT

 S

AFETY

 I

NSTRUCTIONS

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instruc-
tions.

8.

Do not install near any heat sources, such as 
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat. 

9.

Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug 
has two blades with one wider than the other. A 
grounding-type plug has two blades and a third 
grounding prong. The wider blade or third prong 
is provided for your safety. If the provided plug 
does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or 

pinched, particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus. 

11. Only use attachments/accessories specified by 

the manufacturer.

12. Use only with the cart, stand, tripod, 

bracket, or table specified by the man-
ufacturer or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to avoid 
injury from tip-over.

13. Unplug this apparatus during lightning storms 

or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has 
been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, 
does not operate normally, or has been dropped.

15. To prevent risk of fire or electric shock, avoid 

overloading wall outlets, extension cords, or 
integral convenience receptacles.

16. Do not let objects or liquids enter the product – 

as they may touch dangerous voltage points or short-
circuit parts that could result in a fire or electric shock.

17. See product enclosure bottom for safety-related 

markings. 

18. Use proper power sources – 

Plug the product into 

a proper power source, as described in the operating 
instructions or as marked on the product.

19. Apparatus shall not be exposed to dripping or 

splashing, and no objects filled with liquids, 
such as vases, shall be placed on the apparatus.

Information about products that 

generate electrical noise

NOTE: This equipment has been tested and found to 
comply with the limits for a Class A digital device, 
pursuant to part 15 of the FCC Rules.These limits are 
designed to provide reasonable protection against 
harmful interference when the equipment is operated in 
a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the 
instruction manual, may cause harmful interference to 
radio communications. Operation of this equipment in 
a residential area is likely to cause harmful interference 
in which case the user will be required to correct the 
interference at their own expense.

Changes or modifications not expressly approved by 
Bose Corporation could void the user's authority to 
operate this equipment.

This Class A digital apparatus complies with Canadian 
ICES-003.

Initial turn on inrush current: 32 Amps

Inrush current after AC mains interruption of 5 seconds: 
32 Amps

This product meets all EN55103-2 immunity 
requirements for E2 electromagnetic environment.

VeniceOG.book  Page 3  Monday, April 30, 2012  2:33 PM

Summary of Contents for L1 model 1S system























Reviews: