Bose
®
ControlSpace
®
ESP-00 Dante
™
network card
9. With the processor connected to the Ethernet network, use ControlSpace
®
Designer
™
software (version 4.0 or newer) to verify that
the card was inserted correctly:
• Press
Scan and confirm that the software detects the processor.
• Right-click the detected processor and display its properties. If the card was installed correctly,
Dante will appear in the correct
slot position.
10. If the card does not appear, repeat steps 1-9. Be sure that the card is seated correctly.
11. For further information on configuring the Dante card, please refer to the ControlSpace Designer Software Guide.
Dante
™
is a trademark of Audinate Pty Ltd.
© 2013 Bose Corporation. All rights reserved.
The Mountain, Framingham, MA 01701-9168 USA
www.pro.Bose.com
All trademarks are the property of their respective owners.
AM626034 Rev. 00
