©2010 Bose Corporation, The Mountain Framingham,
MA 01701-9168 USA
AM331291 Rev.00
pro.Bose.com
Use the ControlSpace
9.
®
Designer™ software to verify the card was inserted
correctly:
a) Press scan and confirm that the software detects the card.
b) If the card was installed correctly, right-clicking the ESP and displaying
its properties will show
ESPLink
in the correct slot in the ESP.
See
Figure 3
.
Figure 3
If an error message appears, or the software does not properly detect the
10.
ESPLink Output Card, repeat the installation instructions. Be sure that the
card is completely pushed into the connector, and that the card is properly
aligned in the chassis.
