Bose ControlSpace ESP-1240A Installation Manual Download Page 3

English 

 3

Installation Guide 

 ControlSpace ESP-880A/880AD/1240A/1240AD

pro.Bose.com

Important Safety Instructions

Please read and keep all safety and use instructions.

This product is intended for installation by professional installers only!

 This document is intended to 

provide professional installers with basic installation and safety guidelines for this product in typical fixed-

installation systems. Please read this document and all safety warnings before attempting installation.
Do not attempt to service this product yourself. Refer all servicing to authorized service centers, installers, 

technicians, dealers or distributors. To contact Bose Professional or to find a dealer or distributor near you, 

visit 

pro.Bose.com

 and click 

Knowledge

.

1. 

Read these instructions.

2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding type plug has two blades and a third grounding 

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit 

into your outlet, consult an electrician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

11.  Only use attachments/accessories specified by the manufacturer.
12. 

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or 

sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over. 

13.  Unplug this apparatus during lightning storms or when unused for long periods of time.
14.  Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged 

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen 

into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or 

has been dropped.

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product 

enclosure that may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions 
in this guide.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

All Bose products must be installed in accordance with local, state, federal and industry regulations. It is 

the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed 

in accordance with all applicable codes, including local building codes and regulations. Consult the local 

authority having jurisdiction before installing this product.
Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and 

property damage. It is the installer’s responsibility to evaluate the reliability of any mounting method used 

for their application. Only professional installers with the knowledge of proper hardware and safe mounting 

techniques should attempt to install any loudspeaker overhead.
Do not mount the product in locations where condensation may occur.
This product is not intended for installation or use in indoor water facility areas (including, without limitation, 

indoor pools, indoor water parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture. Not 

applicable for products rated IPX4-9.
Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted 

candles, on or near the product.
Do NOT make unauthorized alterations to this product.
Do NOT use a power inverter with this product.
Do NOT use in vehicles or boats.
Provide an earth connection or ensure the socket outlet incorporates a protective earthing connection before 

connecting the plug to the mains socket outlet.
Denmark: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.
Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
Norway: Apparatet må tilkoples jordet stikkontakt.
Sweden: Apparaten skall anslutas till jordat uttag.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall 

remain readily operable.
Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or 

the like).

CAUTION: 

Only use the mounting hardware recommended by the rack manufacturer.

Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as 

in a wall cavity or in an enclosed cabinet.
Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat 

registers or other apparatus (including amplifiers) that produce heat.

Regulatory Information

CAN ICES-3 (A)/NMB-3(A)
WARNING:

 This is a class A product. In a domestic environment this product may cause radio interference in 

which case the user may be required to take adequate measures.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in 

a residential area is likely to cause harmful interference in which case the user will be required to correct the 

interference at their own expense.
Changes or modifications not expressly approved by Bose Corporation could void the user's authority to 

operate this equipment.
Shielded cables are required to maintain regulatory compliance.
This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.

This product conforms to all applicable EU directive requirements. The complete declaration of 

conformity can be found at 

Bose.com/compliance

This symbol means the product must not be discarded as household waste, and should be 

delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps 

protect natural resources, human health and the environment. For more information on 

disposal and recycling of this product, contact your local municipality, disposal service, or the 

shop where you bought this product.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Part Name

Toxic or Hazardous Substances and Elements

Lead 

(Pb)

Mercury 

(Hg)

Cadmium 

(Cd)

Hexavalent 

(CR(VI))

Polybrominated 

Biphenyl (PBB)

Polybrominated 

diphenylether (PBDE)

PCBs

X

O

O

O

O

O

Metal parts

X

O

O

O

O

O

Plastic parts

O

O

O

O

O

O

Speakers

X

O

O

O

O

O

Cables

X

O

O

O

O

O

This table is prepared in accordance with the provisions of SJ/T 11364.

O:

 Indicates that said hazardous substance contained in all of the homogeneous 

materials for this part is below the limit requirement of GB/T 26572.

X:

 Indicates that said hazardous substance contained in at least one of the 

homogeneous materials used for this part is above the limit requirement of GB/T 26572.

Taiwan Restriction of Hazardous Substances Table

台灣 

BSMI

 

限用物質含有情況標示

設備名稱 :聲音處理器,型號 :

812862, 812872, 812806, 812848

限制物質及其化學符號

裝置

 

(Pb)

 

(Hg)

 

(Cd)

六價鉻

 

(Cr+6)

多溴化聯苯

 

(PBB)

多溴聯苯醚

 

(PBDE)

印刷電路板

-

O

O

O

O

O

金屬零件

-

O

O

O

O

O

塑膠零件

O

O

O

O

O

O

揚聲器

-

O

O

O

O

O

連接線

-

O

O

O

O

O

備註 

1

  

O

」表示限制物質的濃度百分比含量未超過參考值。

備註

 

2

」表示限制物質屬於豁免項目範圍。

Please complete and retain for your records.

Serial Number: _______________________________________
Model Number: _______________________________________

Date of Manufacture: 

The eighth digit in the serial number indicates the year of manufacture; "7" is 2007 or 2017.

Bose Corporation Headquarters:

 1-877-230-5639

Mexico Importer:

 Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 

11000 México, D.F. For importer & service information: +5255 (5202) 3545

EU Importer:

 Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

China Importer:

 Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, 

China (Shanghai) Pilot Free Trade Zone

Taiwan Importer: 

Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan 

+886-2-2514 7676

Warranty Information

This product is covered by a limited warranty.
For warranty details, visit 

pro.Bose.com

.

Dante™ is a trademark of Audinate Pty Ltd. Arm is a registered trademark of Arm Limited (or its subsidiaries) 

in the US and/or elsewhere. ©2018 Bose Corporation. No part of this work may be reproduced, modified, 

distributed or otherwise used without prior written permission.

Summary of Contents for ControlSpace ESP-1240A

































Reviews: