background image

5

Installation

Using a junction box

Install a double-gang electrical box for 
each user interface. 

The Bose

®

 ControlSpace™ CC-4 Room 

Controller is designed to fit a North Ameri-
can, Japanese, Australian, and some 
European double-gang junction boxes. 

• Mount a North American or 

Japanese box vertically, as 
shown.

• Mount a European or 

 

Australian box horizontally, 
as shown.

• Choose a location that is convenient for 

the person using the controls.

• Install the junction box recessed slightly 

or flush to the surface of the finished 
wall. 

CAUTION: 

Do not install a ControlSpace 

CC-4 Room Controller in a junction box that 
houses an AC power (mains) cord.

CAUTION: 

Install only in accordance with 

the National Electrical Code. Consult your 
local AHJ for further information.

Mounting

After connecting the wires, mount the user 
interface in the junction box. 
Two sets of screws are provided. Use the 
screws that are appropriate for your junc-
tion box: Use #6 for North American 
boxes, or M4 for Japanese, European, and 
Australian boxes.

CAUTION: 

Do not overtighten the screws. 

Overtightening may cause the frame to 
break.

Room 

Control 

frame

Cover

After securing the user interface frame to 
the junction box, snap the cover onto the 
frame.

To remove the cover, insert the flat head of 
a screwdriver into the slot on either side of 
the cover. 

AM306693_01_Install Guide.fm  Page 5  Monday, June 4, 2007  4:43 PM

Reviews: