3
Electrostatic Discharge Sensitive (ESDS)
Device Handling
This unit contains ESDS devices. We recommend the following precautions when repairing,
replacing or transporting ESDS devices:
• Perform work at an electrically grounded work station.
• Wear wrist straps that connect to the station or heel straps that connect to conductive floor
mats.
• Avoid touching the leads or contacts of ESDS devices or PC boards even if properly
grounded. Handle boards by the edges only.
• Transport or store ESDS devices in ESD protective bags, bins, or totes. Do not insert
unprotected devices into materials such as plastic, polystyrene foam, clear plastic bags,
bubble wrap or plastic trays.
SPECIFICATIONS
General
Electrical
Inputs:
Line-level balanced XLR and unbalanced 1/4" phono
Input Impedance:
10k unbalanced, 2.4k balanced
Pin Assignment:
See schematic
Maximum Amperage:
6.5 amps
Power Input Requirements:
120V, North America
230V, Europe and Australia
100V, Japan
Power Output:
100VAC line input: 350W
115VAC line input: 450W
230VAC line input: 450W
Common Mode Rejection Ratio:
40 dB
Weight:
75 lb. (34 kg)
Dimensions:
16"H x 22 1/4" W x 23 1/4" D (40.6 x 56.5 x 59.1 cm)
Driver Complement:
Six 4 1/2" helical voice coil drivers, One 12"
magnetically braked woofer
