U
SING
YOUR
A
COUSTIC
W
AVE
®
C
ONNECT
K
IT
6
English
Deutsch
Français
Arabic
Español
Italiano
Thai
Nederlands
S. Chin
Korean
Control of your iPod and Acoustic Wave
®
II system
We recommend replacing the remote that came with your Acoustic Wave
®
II
system with this new remote (shown below). Then you can use the new remote
exclusively (not the buttons on your Acoustic Wave
®
II system), to keep your iPod
and system performing together as intended.
Note:
The remote that came with your Acoustic Wave
®
system can also be used to
control the iPod kit. Use the AUX button on the original remote instead of the iPod
button on the new remote.
Most of the remote control buttons are described in your Acoustic Wave
®
II
system owner’s guide. The remote buttons below provide added features.
AUX 1-2
• Selects the iPod connected
to AUX IN on the system.
• Switches between AUX 1
and 2 on the CD changer.
See the CD changer guide
for more information.
On-Off
Turns off iPod.
Seek/Track
• Single press
skips one track.
• Press and hold
scans quickly
through a track.
Tune/Playlist
Moves from one playlist
to the next.
Play/Pause
• Pauses or resumes iPod play.
FM or AM
• Selects the
FM or AM source.
• Turns off iPod.
CD
• Selects the Acoustic Wave
®
music
system II CD source.
• Turns off iPod.
The response to some remote commands depends on which source (FM/AM/
CD/iPod/AUX) is playing. If the remote does not work as you expect, press the
button for that source to reset the intended mode of operation.
For use with the CD changer
To hear your iPod play, you may need to press the AUX 1-2 button to select the
input used to connect the dock. The selected input appears on the CD changer
display.
AWMS-II.book Page 6 Thursday, October 2, 2008 3:42 PM