8
October 16, 2001
AM253543_03_V.PDF
Operating Your Acoustic Wave
®
Music System
Operating with the remote control
You can use the remote control (Figure 5) to operate most functions of your
Acoustic Wave
®
music system. For CD repeat and random play modes,
however, you need to use the
CD Mode
button on the system control panel.
If the remote stops operating, or its range seems reduced, try replacing the
battery. However, keep in mind that lighting and other room conditions, in
addition to battery age, can affect the operating range of an infrared remote
control.
Note:
The remote control feature does not work when operating your
Acoustic Wave
®
music system on battery power. This function is disabled
to conserve battery power. See “Operating on battery power” on page 10.
Figure 5
The Acoustic Wave
®
music system remote
control
Acoustic Wave Music System
1
2
3
4
5
Presets
Skip
Scan
Seek
Tune
On
Off
FM
AM
AUX
CD
Volume
Mute
Press to play or
pause a CD.
Press to stop
the CD player.
Press to play next/previous CD track.
Press and hold to scan forward/
backward through CD tracks.
Press and hold to
raise or lower the
system volume.
Press to play an
auxiliary source
connected to your
system.
Press to turn the system
on to the last source
selected, or off.
Press to turn on the
radio to the last AM/FM
station selected.
Press briefly to tune the next strong
station, or press and hold until you
reach the desired station.
Press to tune to a
preset radio station.
Press to silence
the music system.